Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Columbine, CO
Gate installation in Columbine usually starts with a gate that has finally outlived its posts. This is an unincorporated Jefferson County community of mid-century and 1960s-70s suburban lots along the foothills southwest of Denver, and most of the driveway and privacy gates we see here are original wood or aging steel at the mouth of a large fenced backyard. Hail, downslope wind, and decades of freeze-thaw have a way of deciding when that replacement happens. We build gates for homes like these, and our technicians have up to 10 years of experience with the systems that go on them. Call (877) 330-0618 for a free estimate.
Why Columbine Homes Are Different
Columbine sits in a stretch of the Front Range where the weather does structural work on its own. Summer hail comes through hard, chinook winds drop out of the foothills with real force, and the freeze-thaw cycle repeats all winter on dry ground. On a gate, that combination shows up as hinges that work loose, frames that bend out of square, and operators that get pushed past what they were sized for.
The housing stock explains the rest. Most of these homes went up between the 1960s and 1980s on generous lots, with wood privacy fencing and the original chain-link or wrought-iron driveway gates still standing at the entrance. Galvanized and painted steel hinges seize and rust over time, and a gate that was hung when the fence was new is often carrying hardware nobody has touched in years. After a storm, the calls we get across Columbine are less about normal wear and more about sagging driveway gates and torn privacy-gate hinges. Homes here are unincorporated Jefferson County, so permitting runs through the county rather than a city hall, and there is no single HOA standard dictating what a gate should look like from lot to lot. That freedom is nice until you have to pick a system, which is where brand-level knowledge matters.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Columbine Services
Two jobs account for most of what Columbine homeowners call us about: fixing a gate that has failed or gone unreliable, and getting a new one built and hung properly.
Gate Repair in Columbine
Repair here is usually about hardware that the local weather has been working on for years. We see seized hinges, latches that no longer catch, frames knocked out of square by wind, and posts that have shifted with the freeze-thaw cycle. A wood privacy gate and a wrought-iron driveway gate fail in different ways, and the fix depends on which you have. We look at the whole assembly, not just the part that broke, because a hinge failure on a gate this age usually means the post or frame behind it needs attention too. For the full breakdown of what we handle, see Gate Repair in Columbine.

Electric Gate Repair in Columbine
Automatic gates in Columbine take a beating that manual gates never see. A storm that bends a frame also throws the gate out of alignment with the operator, and the opener starts straining against resistance it was never meant to fight. We diagnose the operator, the wiring, the safety edges, and the gate’s travel together, because a gate that reverses halfway is rarely just an opener problem. We’re experienced with FAAC and BFT systems as well as the residential openers common on these properties. The details are on our Electric Gate Repair in Columbine page.

Gate Installation in Columbine
Most gate installation in Columbine replaces something that has been standing since the 1960s or 70s. The original wood or steel driveway gate at the entrance to a large fenced backyard has usually reached the point where repair costs more than it’s worth, and the posts underneath it have taken decades of freeze-thaw. Summer hail and downslope wind decide the timing for a lot of homeowners here: a storm bends a frame or tears a hinge loose, and the gate that was going to last another few years suddenly doesn’t. Our Gate Installation work starts with the ground and works up, because on these lots the footing is what makes the difference between a gate that swings true for years and one that sags by the second season. We measure the opening, set posts to proper footing depth for the soil and frost movement here, hang the gate, and only then mount and set the operator if there is one.
Driveway Gate Installation
Signs you need it
Your driveway gate drags on the ground, the frame is visibly bent or rusted through, or the posts have shifted enough that the gate no longer lines up with the latch.
What it costs in Columbine
Driveway gate installation typically runs $2,400 to $5,800 depending on width, material, and whether an operator is added, with the written estimate setting the final price.
How we do it
We measure the opening, dig and set posts to proper footing depth, build and hang the gate to swing or slide clean, then hang the operator and set the travel and safety edges if the gate is automated.
Automatic Gate Installation
Signs you need it
You’re tired of getting out of the car in hail or wind, or the manual gate on a long driveway has become a hassle every time you come home.
What it costs in Columbine
Automatic gate installation usually falls between $3,200 and $7,500, covering the operator, the power run, and the safety edges, and the written estimate sets the final price.
How we do it
We confirm the gate is hung and balanced first, run power to the operator location, mount the unit, and set the open and close limits along with the safety edges before we test the full cycle.
What Gate Installation Costs in Columbine
| Item | Typical range in Columbine |
|---|---|
| Driveway gate installation | $2,400 – $5,800 |
| Automatic gate installation | $3,200 – $7,500 |
| Gate and operator replacement (full) | $4,000 – $8,500 |
Can you install a gate that matches my existing fence?
Yes. On these mid-century and 70s lots we regularly build a driveway or privacy gate to match the wood or metal fencing already in place, so the new gate looks like it belongs rather than like an addition. We measure against the existing fence line before we build.
Do you handle the power run and the safety edges for an automatic gate?
Yes. Automatic and electric gate work includes running power to the operator and setting the safety edges so the gate reverses on contact. That is scheduled work measured on-site first, not a same-day repair, and the written estimate covers the whole job before we start.
Brands We Service in Columbine
We work on the systems that actually end up on Columbine properties, from residential openers to commercial-grade operators. We’re experienced with LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, and we diagnose on brand-specific parts rather than guessing. We don’t claim to stock parts locally; we source the right part for your system and schedule the repair around it. See our brands for the full list.
Pricing for Gate Company in Columbine, CO
| Service | Typical range in Columbine |
|---|---|
| Driveway gate installation | $2,400 – $5,800 |
| Automatic gate installation | $3,200 – $7,500 |
| Electric gate installation | $3,200 – $7,500 |
| Sliding gate installation | $2,800 – $6,500 |
| Gate and operator replacement (full) | $4,000 – $8,500 |
| Gate repair (hinge, latch, alignment) | $180 – $450 |
| Electric gate repair (operator or wiring) | $250 – $650 |
What pushes the price up in Columbine is usually the ground and the gate’s size: posts set into soil that has moved with freeze-thaw, wider openings on large lots, and the added operator, power run, and safety edges on an automated install. Every price we give is quoted and agreed before any work starts, so the written estimate is what you pay.
See the difference
Before
After
Before
After
Before
AfterNeighborhoods We Serve in Columbine
We cover the residential streets throughout Columbine and the surrounding unincorporated Jefferson County area, from the older mid-century blocks near the foothills to the 1970s subdivisions closer to the valley floor. The work is the same gate repair and installation wherever you are, but the terrain and housing age shift a little from one part of the community to the next. Dispatch runs from 7am to 7pm, Sunday through Friday. Whether your gate sits at the end of a long driveway or a short one, we schedule a free on-site estimate before any work begins.
- Columbine Knolls
- Columbine Hills
- Columbine Valley-adjacent blocks
- Foothills-side lots southwest of Denver
Service Area – Cities Near Columbine
Columbine sits southwest of Denver along the foothills, and our gate work extends into the neighboring communities nearby. If you’re just outside Columbine, we can still help. We cover Littleton, CO to the south and east, Lone Tree, CO further out, Cherry Creek, CO to the northeast, and Greenwood Village, CO to the east. Wherever you are in this stretch of the Front Range, the estimate is free and the price is set per job by the written estimate.
Serving Columbine, CO – Our Local Coverage Area
We serve Columbine and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Columbine
We answer 24/7, and fast dispatch from 7am to 7pm runs Sunday through Friday, closed Saturday. For repair calls in Columbine we aim to get a technician out same-day where the schedule allows. Call (877) 330-0618 for an exact quote, and estimates are free.
Columbine is unincorporated Jefferson County, so permitting runs through the county rather than a city building department, and it’s worth asking the county whether your project needs one. There’s no single HOA standard here, so check your own association’s rules if you belong to one before we build.
Yes. We serve the residential streets throughout Columbine and the surrounding unincorporated Jefferson County area, from the older foothills-side blocks to the 1970s subdivisions. If you’re unsure whether your address falls in our coverage, call (877) 330-0618 and we’ll confirm.
Contact
Whether your gate has storm damage that needs fixing or you’re ready to replace a gate that has stood since the 1970s, we can help. Our technicians have up to 10 years of experience with the brands on your property, and every job is quoted and agreed before any work starts. Call (877) 330-0618 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within the hour.
- 4You approve before work beginsNothing starts until you say go.
What Columbine Customers Say
"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
- Jeff Gallagher"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
- Luis Castillo"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
- Danielle Hayes