Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Northglenn
If your gate is dragging, sagging, or refusing to open after the last freeze, you’re in the right place. We repair manual and automatic gates for homeowners and property managers across Northglenn, from the ranch streets off 104th to the split-levels up near Malley Drive. We know this town’s gate problems because we know its ground: expansive clay that moves with every thaw. Call (877) 330-0618 for a free estimate. Our technicians have up to 10 years of experience.
Why Northglenn Homeowners Call Aurora Gate Repair
Northglenn gates are their own animal. That’s the reason people here call us: we work gate problems every day and nothing else, so we’re not guessing at your operator or your hinge post. We know your brand, from a Ghost Controls driveway opener to a heavier DoorKing slide system at a small commercial lot.
We serve Northglenn and the surrounding north-metro communities directly, and response times here are tight. When you call, we book a visit into the next opening, Sunday through Friday, 7am to 7pm, with fast dispatch. Same-day visits are often possible when you call early.
What builds trust here is local knowledge. We understand the specific way gates fail in Northglenn’s soil and climate, so we bring the right tools and the right parts the first time. For the full range of what we do, see our gate repair service.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Sliding Gate Repair in Northglenn
Sliding Gate Repair in Northglenn most often comes down to a track that won’t roll straight or a gate that’s dropped and now binds on the guide. A typical sliding gate repair here runs $250 to $650, depending on whether the problem is the track, the rollers, the rack and pinion, or the operator itself. On older properties we frequently find a track set on a footing that has heaved, so the gate rolls fine in summer and grinds in a wet spring. We realign the gate, correct the hardware, and test travel before we call it done.
Track and Roller Correction
Rollers wear flat and tracks fill with grit and snowmelt; both make the gate jump and stall. We clean, adjust, or replace the hardware and true the track so the gate travels without strain on the operator.
Operator Strain and Binding
A gate that binds makes the motor work harder, which shortens its life. We find the binding point, free it, and confirm the operator’s limits so it stops where it should.
Wrought Iron Gate Repair in Northglenn
Wrought Iron Gate Repair in Northglenn usually starts with rust and a hinge that has stiffened over years of sun and snow. A typical wrought iron repair here runs $200 to $550: welding a cracked hinge or frame, treating surface rust, freeing a seized latch, or re-leveling a gate that has dropped on a tilted post. If the gate is dented and dragging after hail or a heavy snow load, we assess whether the frame can be straightened or a section replaced. Metal that’s rusting at the joints and sticking is fixable in most cases.
Rust Treatment and Welding
We grind out the rust, weld weak joints, and prime the repair so it holds against Front Range UV. The goal is to stop the rust from spreading through the frame.
Hinge and Latch Realignment
When the post has leaned, the hinge geometry goes off and the latch won’t catch. We realign the gate on the post and adjust the hardware so it swings and latches cleanly again.
Trusted Brands We Service in Northglenn
We service the systems Northglenn properties actually run: Mighty Mule and Ghost Controls on the residential side, Elite and Linear on mid-range driveway gates, and heavier DoorKing units on commercial and multi-unit entry drives. We don’t claim to stock parts; we identify your system, source what’s needed, and get it fixed. Because we work these brands constantly, diagnosis is faster and the fix is aimed at your specific operator, not a generic one-size guess. From the first repair to a full new installation, we stay on the gate trade and nothing else.
Common Gate Repair Problems We See in Northglenn Homes
- Hinge post tilt after freeze-thaw. Shallow original footings heave in the clay and the post leans, so the gate drags and the latch misses only in cold or wet weather.
- Wind load on solid infill gates. A solid wood or metal gate catches Front Range gusts, stressing the footing and the operator until the post leans further.
- Warped wood and rusted hardware. Decades of UV and snow load racks the frame and rusts the hinges, so the gate swings off and the opener binds.
- Operator safety faults. A photocell knocked out by hail or drift snow stops the gate, and the fault must be cleared before it runs safely again.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Northglenn, CO
We give real ranges rather than “it varies.” A typical hinge and post repair in Northglenn runs $180 to $450. Gate realignment is usually $150 to $350. Sliding gate repair runs $250 to $650, and wrought iron repair $200 to $550. Lock or latch repair typically falls in the $120 to $300 range, and weld and rust repair runs $200 to $550. What moves the number is the footing, the operator, and whether hardware needs replacing. The written estimate sets the final price, and we agree it with you before any work starts. Estimates are free.
We Also Serve Cities Near Northglenn
We cover the north metro and the surrounding communities: Brighton just up the road, Aurora, Cherry Creek, and Greenwood Village. Same gate-only focus, same brand familiarity, same approach to the local soil and weather. If you’re outside Northglenn, call and we’ll confirm coverage for your address before we book.
Serving Northglenn, CO – Our Local Coverage Area
We serve Northglenn and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Northglenn
Because the gate post footing is moving in expansive clay that heaves with each freeze-thaw cycle. The gate is fine in dry summer and drags when the ground swells or locks up, so it looks seasonal. Call (877) 330-0618 for a free estimate and we’ll check the footing first.
Use the operator’s manual release, which is designed for exactly this. For a slide gate, use the release key or lever on the operator to disengage the drive, then move the gate by hand slowly. For a swing gate, release the arm or the drive per the operator’s instructions. Never force a gate that won’t move freely, and have a technician check the release and the safety edges afterward. Call (877) 330-0618 if you’re unsure how yours releases.
The footing and the operator, in that order. A solid gate is a sail in Front Range gusts, and the original shallow footing leans or cracks while the operator takes the extra strain. Call (877) 330-0618 and we’ll assess the post and the drive together.
Automatic gate operators are built with entrapment protection, and it needs to be working for the gate to run safely. Photocells and safety edges stop the gate when something is in the path. Ask your city about local requirements, and call (877) 330-0618 to have yours tested and repaired.
In most cases it can be repaired. Surface rust and stiff hinges are fixable with welding, treatment, and realignment; full replacement is usually only needed when the frame is badly compromised. Call (877) 330-0618 for a free estimate and we’ll tell you which way makes sense.
Get Your Northglenn Gate Working Again
Don’t let a dragging gate or a dead operator sit through another freeze. Call (877) 330-0618 for a free estimate. We answer 24/7, fast dispatch from 7am to 7pm, Sunday through Friday, and we’ll quote and agree the price before any work starts. Gate specialists, not generalists, and we know your brand.
Written by the team at Aurora Gate Repair.