Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Aurora
Aurora’s acreage entrances and long rural driveways have a gate problem that most repair shops never see: the power and the span. A wide farm gate on a solar operator, a fifteen-foot slide gate on a hundred-foot driveway, a ranch entrance where running mains power out to the post isn’t practical. We work on those systems. Our technicians have up to 10 years of experience and every job on the schedule is a gate job, from a manual cedar gate that won’t latch to a heavy-duty operator that stalls halfway through its travel. We answer 24/7, dispatch runs 7am to 7pm Sunday through Friday, and estimates are free. Call (877) 330-0618.
Why Aurora Homeowners Call Aurora Gate Repair for Gate Repair
Aurora gates fail in ways that are specific to this city’s ground and its weather. Expansive clay soils heave, freeze-thaw cycles work posts loose, and hail and high winds knock photocells and safety edges out of alignment. A technician who has only seen tidy suburban privacy gates will guess at a rural operator problem. We don’t guess. Our gate repair work is the whole trade here, not a side job between fence builds and deck repairs.
We know the brands by name and by part: FAAC, BFT, Linear, Viking, LiftMaster, Ghost Controls, Mighty Mule, DoorKing and Elite. That range matters on acreage. A budget Mighty Mule entry operator and a commercial-grade FAAC swing arm ask for different diagnostics, different parts sourcing, and different conversations about whether a fix makes sense. We can work up and down that ladder without a referral somewhere else.
Response time to Aurora is straightforward: we schedule and dispatch across Aurora, from the older streets of Original Aurora out to the new builds in Saddle Rock. Estimates are free, and the price is quoted and agreed before any work starts.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Wood Gate Repair in Aurora
Wood Gate Repair in Aurora has to account for a fence inventory that’s largely 20 to 40 years old: cedar privacy and chain-link installed during the 1970s through 1990s building boom, now failing at the post and the hinge rather than the panel. On an acreage driveway the panel itself can be sound while the hinge post has shifted 2 inches out of plumb in clay. When an Aurora homeowner needs this work, it’s usually a gate that drags, won’t latch, or binds on the operator arm. Typical wood gate repair in Aurora runs $180 to $480 for hinge, post, and realignment work, and the written estimate sets the final price.
Rot and Hardware Failure
The bottom rails and hinge-side stiles take the water. Once the rail softens, hinges pull out and the gate drops. Repairing the rail and resetting the hardware usually costs less than a full panel replacement, and the estimate will tell you which one you’re looking at.
Post Reset and Footing Depth
Where a post has heaved, we pull it, dig to proper footing depth in the clay, and set it back with the panel hung true. Code-compliant repairs here mean footings of 24 to 36 inches, not the 18-inch sets common on original work.
Driveway Gate Repair in Aurora
Driveway Gate Repair in Aurora is where the power-and-span problem shows up first. On a long driveway, the gate operator is often solar-powered because running mains out to the post is expensive or plain impractical. Solar works fine in July. In a stretch of short, gray winter days the battery and charge controller get starved, and the operator stalls mid-travel or reverses partway through the open cycle. The owner blames the battery. Often the real cause is a heaving hinge post combined with a sagging panel that throws the rack and pinion or arm out of alignment. Typical driveway gate repair in Aurora runs $220 to $650 depending on whether the fix is realignment and re-tuning or a post reset. The price is quoted and agreed before any work starts.
Operator Alignment and Re-Tuning
Once the post and panel are corrected, the operator has to be set up again: travel limits, force settings, and a check that the safety edges and loop detector trip the way they should. A correctly tuned operator stops guessing.
Solar Power and Battery Service
Solar gate openers on Aurora acreage get tested at the panel, the controller, and the battery. Weak batteries and undersized panels are a common reason a gate that ran all summer stalls in winter. That’s a power system diagnosis, not a gate adjustment.
Trusted Brands We Service in Aurora
We service the major gate and operator brands by name: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite and Mighty Mule. That covers a residential Mighty Mule solar opener on a ranch entrance as readily as a BFT or FAAC heavy-duty operator on a wide driveway gate, and DoorKing access systems on commercial entries. We’re independent and experienced with these brands, not tied to any one of them. We don’t stock parts on trucks or claim a local parts inventory, so the right component is ordered for your specific system and the turnaround is scheduled with you. When an electric gate isn’t behaving, the fix starts with correctly identifying the system, the operator and the failure.
Common Gate Repair Problems We See in Aurora Homes
- Solar openers stalling in winter. Short winter days leave a rural driveway operator with a starved battery and a charge controller that never catches up. The gate stalls mid-travel and the owner assumes the motor is failing when the panel and battery are the problem.
- Hinge posts heaved out of the clay. In expansive Aurora clay, a wet spring shifts the whole fence line and an 18-inch original footing can’t hold it. A gate that dragged in June often started with the post, not the panel.
- Wide farm gates binding on heavy-duty operators. A sagging panel throws the rack and pinion or arm out of alignment and the operator works harder than it should. It shows up as a gate that’s slow, noisy, or tripping the operator’s limits.
- Photocells and loop detectors knocked out of alignment. Aurora hail and high winds bend brackets and shift sensors, leaving an automatic gate reversing unexpectedly or cycling on its own. Entrapment protection that trips wrong is a safety issue, so these get checked, not ignored.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Aurora, CO
Gate repair in Aurora typically runs $180 to $480 for hinge, post, lock, and realignment work on a wood or metal gate. Driveway gate repair where an operator is involved runs $220 to $650, which covers realignment, sag correction, and re-tuning. Solar power diagnoses and battery or controller work sit in that range. What moves the number is footing depth, span width, operator condition, and whether a part has to be ordered for a specific system. We give a free estimate, in writing, and the price on that estimate is the price – quoted and agreed before any work starts. That’s the same for a post reset on a rural driveway as for a hinge swap on a Saddle Rock privacy gate. Call (877) 330-0618 for an estimate.
We Also Serve Cities Near Aurora
Our gate repair reaches the communities around Aurora too: Cherry Creek, Greenwood Village, Lone Tree, and Parker. The same clay soils, the same freeze-thaw cycles, and the same operator brands come up in each. If you’re near Aurora, we cover Aurora and the neighboring areas. Call to schedule a free estimate.
Serving Aurora, CO – Our Local Coverage Area
We serve Aurora and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Aurora
Short winter days starve a solar operator’s battery and charge controller, so the gate stalls mid-travel even though the panels produced plenty in summer. Aurora’s semi-arid climate means bright summers and stretched daylight in winter, and a panel sized for the sunny months often can’t keep up. A technician checks the panel output, controller, and battery against the real load, and often the fix is a more capable power setup rather than a new operator. Call (877) 330-0618 for a free estimate.
Yes. A sagging gate on a long driveway can usually be corrected by resetting the hinge post footing to 24 to 36 inches, straightening the frame, and re-tuning the operator, without a new panel. The panel is often sound; it’s the post that moved in the clay. The estimate tells you whether it’s a reset or a replacement. Call (877) 330-0618 for a written estimate.
Yes. Any automatic driveway gate needs working entrapment protection – photocells and loop detectors that stop or reverse the gate if something is in the path. Aurora’s high winds and hail knock these out of alignment, which can leave a gate reversing unexpectedly or cycling on its own. These are checked and re-tuned as part of an automatic gate repair. Call (877) 330-0618 for a free estimate.
Heavy-duty operators from FAAC, BFT, DoorKing, and similar commercial-grade lines suit a wide farm or ranch gate, matched to the gate’s weight, span, and how it swings or slides. Correct sizing matters more than brand loyalty, so the operator is chosen for the specific gate. We work on those systems and the lighter LiftMaster, Linear, and Mighty Mule units too. Call (877) 330-0618 to schedule a free estimate.
Freeze-thaw cycles heave and crack posts and loosen hardware, which is the single biggest cause of gate failure on older Aurora properties. Winter nights below freezing and mild days push moisture in and out of the ground, and original 18-inch post sets can’t hold in the expansive clay. That’s why code-compliant repairs now use footings of 24 to 36 inches. Call (877) 330-0618 for a free estimate.
Get a Free Gate Repair Estimate in Aurora
If your gate drags, stalls, reverses mid-travel, or won’t latch, and it’s on a long driveway or an acreage entrance, the fix usually starts at the post and the power, not the panel. We work the specific brands and systems, and the price is quoted and agreed before any work starts. Call (877) 330-0618. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free.
Written by the team at Aurora Gate Repair.