Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Parker, CO
If you’re replacing a gate in Parker, CO, the job starts with the HOA, not the hardware. Most homes here are 1990s to 2010s suburban builds, and their gates hang on wood posts that move with the clay soil under the Front Range freeze-thaw cycle. We’re a gate-only company: repair, electric gate repair, and new installation, working with systems from Ghost Controls, DoorKing, Elite, and Mighty Mule. Our technicians have up to 10 years of experience. Call (877) 330-0618 for a free estimate.
Why Parker Homes Are Different
Parker sits on expansive clay that swells when it’s wet and shrinks when it dries, and the freeze-thaw cycles along the Front Range push posts up and let them settle back down through the year. A gate that closed cleanly in October can catch on the latch by February. Most of the housing stock is 1990s to 2010s suburban construction, so the gates are lightweight residential swing and slide styles hung on wood posts that were never meant to stay fixed in this ground. Spring hail and strong downslope winds take a toll on the lighter aluminum and vinyl gates, bending frames and denting panels that don’t spring back.
Then there’s the HOA layer. Parker’s master-planned communities, particularly through the 80134 corridor, run architectural review on every gate replacement. A new gate has to match the approved colors, materials, and design of the neighborhood, which means the work often starts with covenants and photos rather than a wrench. In the older core near Mainstreet, some original wood gates sit in fence lines that predate the current rules. Repairing one can pull it into a compliance review if its design no longer fits the neighborhood’s approved palette.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Parker Services
These are the two jobs Parker homeowners call us about most, and they’re the ones where local conditions matter most.
Gate Repair in Parker
Repair work in Parker usually traces back to a post that has heaved or settled in the clay, which throws off the latch, stresses the hinges, and makes a gate drag or sag. We start by checking the posts and the footing before we touch the hardware, because a hinge replacement on a moving post won’t hold. Hail-dented aluminum and wind-bent vinyl get straightened or replaced panel by panel. Our technicians have up to 10 years of experience reading these systems. For the full scope of what we fix, see gate repair in Parker.
Electric Gate Repair in Parker
Automated gates here fail in ways that point straight at the ground. When the post shifts, the gate no longer runs true, so the operator strains against a bind it can’t see, and limit switches drift out of position. We diagnose the operator and the gate together rather than guessing at the control board first. We know the common residential systems (Ghost Controls, Mighty Mule) as well as the commercial-grade units (DoorKing, FAAC), so the diagnosis fits your actual hardware. Details are on our electric gate repair page.
Gate Installation in Parker
Gate installation in Parker means building for ground that moves. The clay and the freeze-thaw cycle will work on any post you set, so footing depth and drainage matter more here than the gate style itself. And because the HOA reviews every replacement, the design has to be settled before anything is ordered. We handle gate installation for both manual and automated systems, and we ask for the covenant language and approved palette up front so the finished gate passes review the first time.
Automatic Gate Installation
Signs you need it
You’re tired of getting out to open the gate by hand, or the existing operator has reached the end of its useful life and parts for it are getting hard to find.
What it costs in Parker
A typical automatic gate installation in Parker runs roughly $2,500 to $6,500, depending on the operator, the gate size, and whether power has to be run to the site.
How we do it
We measure the opening and confirm the approved design with your HOA, set the posts to proper footing depth, hang the gate, mount and program the operator, then test the safety edges and the travel limits before we leave.
Driveway Gate Installation
Signs you need it
The old driveway gate has sagged past adjustment, or a new driveway needs a gate sized for regular vehicle traffic.
What it costs in Parker
Driveway gate installation in Parker typically falls between $1,800 and $5,500, with the material, width, and automation level driving the number.
How we do it
We lay out the swing or slide path, dig and set the posts for the soil here, hang and align the gate, then fit the latch and any operator and safety equipment before the final check.
What Gate Installation Costs in Parker
| Item | Typical range in Parker |
|---|---|
| Automatic gate installation | $2,500 – $6,500 |
| Driveway gate installation | $1,800 – $5,500 |
| Electric gate operator and installation | $1,200 – $3,800 |
Do I need HOA approval before installing a new gate in Parker?
Assume yes. Parker’s master-planned communities run architectural review on gate replacements, so get the approved colors, materials, and design in writing before ordering anything. We’ll work from that approval so the finished gate matches your covenants.
Can you match my existing gate to the neighborhood’s approved design?
That’s most of the job here. We build to the palette your HOA has already approved rather than a catalog default, which is why we ask for the covenant language and photos before we quote the work.
Brands We Service in Parker
We work across the brand spectrum, from entry-level residential systems like Mighty Mule and Ghost Controls up to commercial-grade access equipment from DoorKing and Elite. We don’t claim to stock parts locally; we identify the right part for your system and get it ordered. Most straightforward repairs turn around quickly once the part is in hand. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Parker, CO
| Service | Typical range in Parker |
|---|---|
| Automatic gate installation | $2,500 – $6,500 |
| Driveway gate installation | $1,800 – $5,500 |
| Electric gate operator and installation | $1,200 – $3,800 |
| Sliding gate installation | $2,200 – $6,000 |
| Gate repair | $150 – $600 |
| Electric gate repair | $200 – $850 |
In Parker, price climbs with the ground: a post that needs resetting in the clay adds labor before the gate hardware even comes into it, and HOA-driven custom materials cost more than an off-the-shelf design. We quote the price in writing and agree it with you before any work starts, so the invoice matches the estimate.
Neighborhoods We Serve in Parker
We cover Parker from the master-planned communities in the 80134 corridor out to the neighborhoods around the older Mainstreet core, where the fence lines and wood gates predate the current HOA rules. Wherever you are in town, the procedure is the same: we look at the gate and the posts, confirm what your HOA requires, and give you a written price before work begins.
- Stonegate
- Canterberry Crossing
- Pinery
- Parker’s Mainstreet core
Service Area – Cities Near Parker
Parker sits at the edge of the south metro, and we work the surrounding communities on the same footing. If you’re just outside town, we cover Lone Tree, CO, Cherry Creek, CO, Greenwood Village, CO, and Littleton, CO as well, with the same gate-only focus and the same local conditions in mind. Call to confirm coverage for your address.
Serving Parker, CO – Our Local Coverage Area
We serve Parker and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Parker
We answer 24/7 and run fast dispatch from 7am to 7pm, Sunday through Friday. For repair calls in Parker we aim for same-day service when the schedule allows; a call outside dispatch hours is booked into the next opening.
HOA review is the common one here, especially in the 80134 corridor’s master-planned communities. For permits, check with the city’s building department before work starts. We’ll work from whatever approval your neighborhood requires.
Yes. We work across Parker, from the 80134 corridor to the Mainstreet core, along with the nearby south-metro cities. Call (877) 330-0618 for a free estimate, and we’ll confirm your address and the right approach.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within the hour.
- 4You approve before work beginsNothing starts until you say go.
What Parker Customers Say
"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
- Jeff Gallagher"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
- Luis Castillo"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
- Danielle Hayes